如何準備你的學術會議論文講義 (PART A) 研究生英文編修出版投稿日報 9/26/2015

Phalacrocorax-auritus-007

研究生英文編修出版投稿日報:
* 如何準備你的學術會議論文講義 (PART A)
* 學術英文投稿教學影片(607) Perfectionism and Procrastination in Graduate School Life
* 再次檢查錯誤的比較詞及粗心的疏漏 (明白寫作) 英文編修訓練 (2 / 12)
* Viết tiếng Anh học thuật Bảng tin hàng ngàym
* 非正式工程英文技術報告 (102) (上)
學術英文投稿教學影片(607) Perfectionism and Procrastination in Graduate School Life
觀看本學術英文投稿教學影片以加強英文寫作投稿能力
再次檢查錯誤的比較詞及粗心的疏漏 (明白寫作) 英文編修訓練 (2 / 12)

不合邏輯及不完整的比較詞造成更多的含糊不清,同時注意不小心漏掉的字。

請把練習題列印出來再以紅筆用標準編修註記修改:

5. The two step-procedure assumes that the sample standard deviation is proportional the sample
mean.

6. The novel material described herein has a higher withstanding temperature.

7. The university stresses discipline more than the institute.

8. The peak is as high, if not higher than, other ones.

Answer

科技英文編修訓練手冊 柯泰德

Viết tiếng Anh học thuật Bảng tin hàng ngàym
* Tránh sự thay đổi không cần thiết trong một câu (7/9) (Chỉnh sửa cho rõ rang) (Đào tạo chỉnh sửa
trong viết văn bản tiếng anh)
* Video giảng dạy viết bài báo tiếng Anh (237): How To Track Your Time To Increase Your Productivity
* Tổ chức lớp viết báo khoa học Kỹ thuật đăng trên tạp chí quốc tế (46) (phần 2)
* Thực hiện (Ví dụ: Electrical Engineering)
如何準備你的學術會議論文講義 (PART A)

* 使用會議講義提醒你的聽眾內容是什麼,以及可以寫一些筆記。

* 不要使用太小文字,字體不小於10點。

* 講義,不應該超過兩頁。

* 為做筆記留下一些空白。

* 你的講義用條列的形式提供信息。

* 請確保你的談話明確指示你的聽眾講義信息,如“正如你可以看到從講義七’和’講義四場……”

Source: Tips for Conferences or “Don’t Wear Pearls” (lizgloyn)

非正式工程英文技術報告 (102) (上)

強有力的工程英文技術報告包括以下要素:

* 簡要的描述工程方案所關心的事項 。經由一個句子描述工程機構對影響目標工程或客戶有關事項的關心程度。

* 闡明特定部門或客戶所關心的工程環境:管理問題形成的工程環境背景描述。

* 介紹工程問題:工程問題的本質和對與其相關的特定部門或客戶的負面影響。

* 介紹工程方案的目標:工程機構對以上問題最合理的回應

* 工程方案方法論的細節描述:精確的方案步驟描述。

* 工程方案主要成果總結:工程方案對特定部門或客戶立即的利益。

* 工程方案對特定部門或領域的全面貢獻:研究結果和所提方法對工程機構以外更廣大讀者的牽涉。

強有力的工程英文技術報告包括以下要素:

簡要的描述工程方案所關心的事項 Our group has thoroughly explored the complexity involved in treating defective CCDs. 闡明特定部門或客戶所關心的工程環境 The image data of a spatial dimension in cross-track and the spectral dimension are sampled simultaneously for hyperspectral imagers by using a 2D detector array. Based on use of the pushbroom mechanism, these spectrographs, with an entrance slit and a PGP dispersing element, is extensively adopted in remote sensing. A hyperspectral image of a large ground surface can be easily obtained by multiple image acquisition using these imagers. 介紹管理問題The detector array gradually malfunctions after long-term imaging operations. Additionally, a few CCDs in the detector array decline in performance with different levels. For instance, a higher performance decay level of defective CCDs, e.g. 50%, implies a greater impact on the image quality for a hyperspectral image; the same condition is true as the number of defective CCDs and the spectrum bands. Such defective CCDs produce vertical stripes in image segments and degrade the image quality of a hyperspectral imager. While the detector array must be replaced to maintain high image quality, replacing a detector array with only a few defects is economically infeasible.

有效撰寫英文工作提案 柯泰德

Source:

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s