(結論 /參考 / 表和圖): 進行學術期刊論文審查時應該問的問題 (PART B) 研究生英文編修出版投稿日報 9/3/2015

Osteospermum ecklonis1

研究生英文編修出版投稿日報:
* (結論 /參考 / 表和圖): 進行學術期刊論文審查時應該問的問題 (PART B)
* 學術英文投稿教學影片(584) Academic Writing: The literature review
* 句子的結構須有一致性 (明白寫作) 英文編修訓練 (3/12)
* Viết tiếng Anh học thuật Bảng tin hàng ngàym
* 非正式工程英文技術報告 (90) (下)
Academic publishing news 學術英文編修出版新聞

(結論 /參考 / 表和圖): 進行學術期刊論文審查時應該問的問題 (PART B)

* 表和圖

– 每個表和圖都是必要的嗎?

– 可以用期刊引用替換表或數字?

– 表包含太多的數據?

– 表中包含的數據是不是具有實質意義?

– 表中的數據可以用圖更好地表示?

– 圖和表的標題是否準確描述表格的內容?

Source: How to Review a Technical Paper by Alan Meier (scribd)

學術英文投稿教學影片(584) Academic Writing: The literature review
觀看本學術英文投稿教學影片以加強英文寫作投稿能力
句子的結構須有一致性 (明白寫作) 英文編修訓練 (3/12)

科技英文寫作中,句子的建構必須有一致性。

請把練習題列印出來再以紅筆用標準編修註記修改:

9. The two-step procedure not only identifies those factors that significantly affect the signal-to-noise (SN) ratio, but also the levels that maximize SN are found.

10. Logethetis (1988) proved that strong non-linearities exist and the B technique was also recommended for use by him.

11. This work not only proposes an effective procedure based on the rank transformation of responses and regression analysis, but also the singly censored data are discussed.

12. The following steps describe the procedure:

Step 1: Calculate the normalized decision matrix.

Step 2: The weighted normalized decision matrix is calculated.

Step 3: The ideal and negative-ideal solution is determined.

Step 4: Calculate the separation measures.

Step 5: The relative closeness to the ideal solution is calculated.

Step 6: The preference order is ranked.

Answer

科技英文編修訓練手冊 柯泰德

Viết tiếng Anh học thuật Bảng tin hàng ngàym

* Loại bỏ các vấn đề về chỉnh sửa (11/12) (Chỉnh sửa cho rõ rang) (Đào tạo chỉnh sửa trong viết văn bản
tiếng anh)

* Video giảng dạy viết bài báo tiếng Anh (209): How to use SQ3R to Understand and Comprehend Written
Material

* Tổ chức lớp viết báo khoa học Kỹ thuật đăng trên tạp chí quốc tế (31) (phần 2)

* Thực hiện (Ví dụ: Information Technology)

非正式工程英文技術報告 (90) (下)

強有力的工程英文技術報告包括以下要素:

* 簡要的描述工程方案所關心的事項 。經由一個句子描述工程機構對影響目標工程或客戶有關事項的關心程度。

* 闡明特定部門或客戶所關心的工程環境:管理問題形成的工程環境背景描述。

* 介紹工程問題:工程問題的本質和對與其相關的特定部門或客戶的負面影響。

* 介紹工程方案的目標:工程機構對以上問題最合理的回應

* 工程方案方法論的細節描述:精確的方案步驟描述。

* 工程方案主要成果總結:工程方案對特定部門或客戶立即的利益。

* 工程方案對特定部門或領域的全面貢獻:研究結果和所提方法對工程機構以外更廣大讀者的牽涉。

研讀以下工程計劃以辦別包含的科技論點:

介紹管理方案的目標 Therefore, we developed a modified FJP method to ensure not only that the shape is close to Gaussian distribution with a low pressure air source, but also that the resolution of material removal should be small and stable. 管理方案方法論的細節描述 Slurry was carried with low air pressure, based on use of siphonic and laminar flow theories. The Gaussian shape was then achieved by using a nozzle different from the conventional one, in which both air and slurry passed through simultaneously. Next, fine resolution of material removal was obtained by optimization of the slurry concentration and air pressure. 管理方案主要成果總結 According to our results, the modified FJP method can produce stable material removal less then 50 nm deep by using 1~2 bar air pressure source and the new nozzle. Via the modified FJP method, small optical elements can be fabricated using accurate material removal. 管理方案對特定部門或領域的全面貢獻 Furthermore, the enhanced capability of material removal can fabricate precise optical elements, ultimately improving the performance of an optical system.

有效撰寫英文工作提案 柯泰德

Source:

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s