*在一個口頭報告中如何有效地運用您的聲音 (PART A)
*在口頭報告時如何面對觀眾 (PART A)
*學術英文投稿教學影片 (106) : Research workflow with Zotero
*工程英文問題描述 (91) (上)
Academic publishing news 學術出版新聞
在一個口頭報告中如何有效地運用您的聲音 (PART A)
在口頭報告時如何面對觀眾 (PART A)
學術英文投稿教學影片 (106) : Research workflow with Zotero
You may have already received my letter dated November 30, 2014 concerning the Waste Exchange Information Center(WEIC) here in Taiwan.
I am pleased to inform you of a long-term environmental project that is being undertaken at WEIC. This long-term program, ” the Industrial Waste Minimization Informational Service,” has been sponsored by the Industrial Development Bureau (IDB) for nearly three years. WEIC is a non-profit subsidiary of the Industrial Technology Research Insititute. The goal of the long-term program is to provide relevant information in the practice of industrial waste minimization. This is a service made available free of charge to all interested organizations.
Our major work includes the publication of a bimonthly waste minimization magazine, facilitation of waste exchange, and accumulation of commercialized waste minimization technologies. The results obtained from this program have helped expedite environmental protection efforts in Taiwan.
We recognize that ensuring continued success of this program necessitates that we observe and understand similar works in your country. Waste minimization is a global trend and your country already has much experience in this area.
I would like to arrange for a visit to your facilities. If this is agreeable with you, please contact me at your earliest convenience.
工程英文問題描述 (91) (上)
*工程提案建構 : 你工程提案的主題是什麼? 你的讀者可以明瞭工程提案的內容嗎?
*工程問題 : 你的工程提案裡有你試著要解決或是想更進一步瞭解的問題嗎?
*工程問題的量化 : 你要如何量化問題來讓你的讀者明白之前文獻研究所遇到的量化限制 ?
*工程問題的中心 : 如果問題沒被解決或是充分瞭解, 這對工程提案的讀者會有多大的負面衝擊?
*工程計劃需求 : 根據以上問題,最迫切的計劃需求是什麼?
工程計劃建構 The FJP method originated from the demand for miniaturized optical elements in recent years and the inability of the conventional polishing method can not satisfy the fabrication requirements of those elements. The FJP method facilitates the removal of nanometer deep material, subsequently correcting errors in the optical elements. 工程計劃問題 However, the FJP method fails to comply with the requirement of a higher pressure, i.e. >6 bar, to pump the slurry in order to remove the material of elements. Additionally, the shape that the FJP produces on the surface is not the Gaussian distribution, thus making it extremely difficult to more accurately control form correction. 工程計劃問題的量化 For instance, the FJP method has difficult in satisfying the requirement of form error /10 for small optical elements. 工程計劃問題的中心 The inability to optimize the design of an optical system owing to limitations of the FJP method makes it impossible to achieve high precision in product manufacturing. 工程計劃需求 Therefore, a modified FJP method must be developed to ensure not only that the shape is close to Gaussian distribution with a low pressure air source, but also that the resolution of material removal should be small and stable.